Description
|
|
|
|
Compressed air or saturated steam is the power source for this air mover. It operates on the venturi principle whereby you take small volumes of high velocity air (from the compressor) and inject it through the casting and out the nozzle jets, creating a venturi action or pulling action that induces large volumes of low velocity air through the venturi and out the air diffuser.
A 1″ hose is recommended from your air supply source to the side inlet connection. Maximum operating pressure 140psi.
 |
|
| SPECIFICATIONS | |||
| TX8AM | |||
| Overall Length (in) | 46.06 | ||
| Diameter of Base (in) | 14.37 | ||
| Diameter Top of Horn (in) | 14.25 | ||
| NPT Size (in) | 1 | ||
| Bolt Circle Diameter (in) | 13.62 | ||
| Base Slot Diameter (in) | 0.5 | ||
| Net Weight (lb) | 36 | ||
|
PERFORMANCE |
|||
|
TOTAL AIR FLOW AND CONSUMED AIR
AT VARIOUS INLET PRESSURES
|
Total Air Flow CFM | Air Consumed CFM | Free Air Induction Ratio |
|
60 PSIG |
4215 | 103 | 39.03 |
|
80 PSIG |
4810 | 142 | 33.87 |
|
100 PSIG |
5435 | 178 | 30.53 |
